Skip to content

Not medical advice. Talk to your provider before using any peptide. Full disclaimer

Peptide Schedule Research TeamReviewed Sep 24, 202625 Citations

Retatrutide peptide icon, one bubble per amino acidRetatrutide39 residues (approx.)YAQGTFTSDYSILLDKKAQAAFIEYLLEGGPSSGAPPPSEach bubble = one amino acid. Size = residue mass. Color = chemical class.Uses closest standard amino acids for non-standard residues.

Retatrutide Dosage Calculator

Weight Loss · Phase 3 · Grade B · ~6 days half-life · Injection

Calculate your dose

Adjust vial, water and dose. The answer updates live.

mL
Dose
Syringe

All three take the same units for the same dose. A smaller barrel just spreads it over more space.

↓ 40.0020406080100
Draw to 40.0 units= 0.400 mL

on a U-100 syringe for a 1,000 mcg = 1 mg dose

Check that your syringe says U-100.

Concentration
2,500
mcg/mL
Doses / vial
5
Cost / dose
$8–18
Range · View
22 US pricesOct 31
Your mixing recipe

Add 2 mL BAC water to your 5 mg vial. Draw to 40.0 units on a U-100 syringe for a 1 mg dose. This vial will last 5 doses.

A reminder for 1 mg (40 units) every week, with a free account.

Dose math and a schedule you can keep.

Syringe units in one tap. A free account adds dose reminders and calendar sync, plus alerts on the peptides you save.

Track every dose with reminders and a calendar.

  • Dose remindersPush or calendar alarm
  • Peptide alertsFor peptides you save
  • Calendar syncApple, Google, Outlook
  • Supply countsDoses left per vial

Your plans, logs and saved peptides sync to every device.

Opens a preview of your schedule first.

Your logs and saved lists are never sold, and not shared except where you choose.

What you need to mix this6 items, matched to your vial, BAC water and syringe
  • Retatrutide, 5 mg vialThe vial size set in the calculator.
  • Bacteriostatic water, 2 mLPrescription-only in the US, so it is dispensed by a pharmacy on a clinician's prescription.
  • 1 mL U-100 insulin syringe (100 units)Matches the syringe set in the calculator. Use a new sterile one for every injection.
  • Alcohol swabsFor each vial stopper every time a needle goes in, and for the injection site. Let the alcohol dry first.
  • A sharps containerUsed syringes go in right after each injection, never loose in the trash.
  • Storage after mixingRefrigerate, use within 4 weeks.

How to choose each item: the peptide supplies guide.

Open Retatrutide details
Side effects, protocols by goal, storage, and the sources behind these dosing numbers.

About Retatrutide

Turns your vial size, BAC water, and dose into exact syringe units. Free to use.

Retatrutide is a triple-agonist peptide (GLP-1, GIP, glucagon) that cut body weight 25.0% at 80 weeks in the peer-reviewed TRIUMPH-1 trial. Not yet FDA approved. Liver fat fell more than 80% on 8 and 12 mg in a Phase 2 MASLD substudy.

GLP-1 AgonistGIP AgonistGlucagon AgonistTriple AgonistWeight Management
Subcutaneous. Typical beginner frequency: weekly.At beginner dose (1000 mcg) with a 5mg/2mL vial: draw to the 40-unit mark on a U-100 syringe.
After reconstituting, store at 2-8°C (36-46°F). Refrigerate, use within 4 weeks.

View side effects and safety warnings →

Quick-Start: Reconstitution

  1. 1Clean the top of your lyophilized retatrutide vial with an alcohol swab. Draw 2 mL of bacteriostatic water into a syringe and inject it slowly down the inner wall of the vial. Do not shake. Swirl gently until the powder dissolves completely.
  2. 2Calculate your syringe units. With a 10 mg vial and 2 mL BAC water, your concentration is 5 mg/mL. For a 1 mg dose, draw 20 units on a 100-unit insulin syringe. For 2 mg, draw 40 units. For 4 mg, draw 80 units. For 8 mg, draw 160 units (or use a 15 mg vial at 7.5 mg/mL for higher doses; 8 mg then equals approximately 107 units).
  3. 3Pinch a fold of skin at your injection site (abdomen, outer thigh, or upper arm). Insert a 29 to 31 gauge needle at a 45 to 90 degree angle. Inject slowly. Hold for 5 seconds before withdrawing.
Full injection guide →
Need a different vial size? Open the universal Retatrutide reconstitution calculator to enter any vial mg + BAC water mL.

Retatrutide Dosing Protocol

Clinical TrialPhase 2 trial (NEJM 2023): 1 mg was the fixed low-dose arm. Phase 3 TRIUMPH titration starts at 2 mg; a 1 mg start is community practice
LevelDose / InjectionFrequency
Beginner1 mgWeekly
Moderate4 mgWeekly
Aggressive12 mgWeekly
Note:

Phase 3 TRIUMPH trials start retatrutide at 2 mg weekly and step up every 4 weeks. Many community users start lower, at 1 mg (the dose of the fixed low-dose arm in Phase 2), regardless of prior GLP-1 experience. The triple-receptor mechanism means your gut is adapting to three agonists at once. Even users who tolerated tirzepatide at high doses report rougher GI onboarding with retatrutide.

Reconstitution math for common vial sizes: a 10 mg vial with 2 mL bacteriostatic water gives you 5 mg/mL. At that concentration, 1 mg equals 0.2 mL, which is 20 units on a standard 100-unit insulin syringe. A 4 mg dose would be 80 units. For the 12 mg maintenance dose, you'll want a 15 mg vial with 2 mL BAC water (7.5 mg/mL); 12 mg then equals 1.6 mL or 160 units. At 160 units, consider splitting across two injection sites to reduce volume discomfort.

Track your resting heart rate from day one. The glucagon component raises energy expenditure, and HR is the clearest early signal of dose-dependent cardiovascular stress. If your resting pulse sits above 90 bpm for more than a week, hold the current dose before escalating.

Evening injections let you sleep through peak nausea, which typically hits 4 to 8 hours post-injection.

Dosing based on Phase 2 trial (NEJM 2023): 1 mg was the fixed low-dose arm. Phase 3 TRIUMPH titration starts at 2 mg; a 1 mg start is community practice: 25 published references.View all sources →

How the Retatrutide Math Works

5mg in 2mL
=2.5mg/mL
2.5mg/mL
=25 mcg per unit
1,000 mcg / 25
=40 units
5mg / 1,000 mcg
=5 doses

Based on a 5mg vial, 2mL of bacteriostatic water, the beginner dose (1,000 mcg), and a U-100 syringe. Change any input in the calculator and every line moves with it.

Ask AI about this math

Cross-check your Retatrutide reconstitution math with AI

Retatrutide Cost

Brand Price
Not commercially available (no FDA approval as of October 2026). Projected list price $1,000–$1,500/month based on tirzepatide/semaglutide pricing precedent.
Compounded
No compounded price is listed: FDA warning letters dated September 9, 2025 say drugs compounded with retatrutide are not eligible for the 503A or 503B exemptions

Pricing updated 2026-04-09

Prices are estimates and vary by source, location, and prescription status.Full pricing breakdown →

Retatrutide Pharmacokinetics

Pharmacokinetics: Active Dose Over Time

t½ = ~6 days
50%25%12.5%100%75%50%25%0%06d12d18d24d30dTime after injectionDose remaining
After 1 half-life (6d): 50% remainsAfter 2 half-lives (12d): 25% remainsAfter 3 half-lives (18d): 12.5% remains
At a 4 mg dose: 50% = 2 mg remaining after 6d. Moderate-tier frequency in our sources: Weekly.

Disclaimer: This curve is a simplified first-order exponential decay model. Actual pharmacokinetics vary based on injection site, individual metabolism, body composition, and other factors. Half-life values are approximate and based on available preclinical and clinical literature. Many research peptides lack formal human pharmacokinetic studies. This is for educational purposes only, not medical advice.

Read the full Retatrutide guide →Best Peptides for Weight Loss →Retatrutide and Anhedonia: The Emotional Flattening Question →Retatrutide Dosage: Titration Schedule, Starting Dose, and Chart →Retatrutide Side Effects: The Complete Profile With Rates →Insulin Syringe Units for Peptides: Units to mL to mg →

Comparing Options?

Related Tools

Frequently Asked Questions

It depends on your vial size, BAC water, and dose. For a 5mg vial with 2mL BAC water, a beginner dose of 1000mcg is typically 40 units on a U-100 syringe. Use the calculator above for your exact numbers.

The standard amount is 2mL of bacteriostatic water for a 5mg vial. More water gives a more dilute solution, so the same dose fills more of the syringe and is easier to measure. Less water makes the draw smaller and harder to read. The number of doses per vial does not change either way, since that depends only on vial size and dose. Adjust the BAC water slider in the calculator to see how it changes your syringe units.

At a beginner dose of 1000mcg weekly, a 5mg vial lasts about 5 doses. The calculator shows exact doses per vial for your selected tier.

Most people use a 1mL U-100 insulin syringe (100 units). For very small doses, a 0.5mL or 0.3mL barrel is easier to read. All three are U-100 graduated, so the number of units to draw is the same on each. Veterinary U-40 syringes are a different scale and the calculator adjusts for that separately.

Store reconstituted Retatrutide at 2-8°C (36-46°F). Refrigerate, use within 4 weeks. Unopened vials: Refrigerate at 2-8°C.