Skip to content

Not medical advice. Talk to your provider before using any peptide. Full disclaimer

Peptide Schedule Research TeamReviewed Apr 7, 20269 Citations

SS-31 (Elamipretide) peptide icon, one bubble per amino acidSS-31 (Elamipretide)4 residuesRYKFEach bubble = one amino acid. Size = residue mass. Color = chemical class.

SS-31 (Elamipretide) Dosage Calculator

Anti-Aging · FDA Approved · Grade A · 4 h half-life · Injection

Calculate your dose

Adjust vial, water and dose. The answer updates live.

mL
Dose
Syringe

All three take the same units for the same dose. A smaller barrel just spreads it over more space.

↓ 40.0020406080100
Draw to 40.0 units= 0.400 mL

on a U-100 syringe for a 4 mg = 4,000 mcg dose

Check that your syringe says U-100.

Concentration
10,000
mcg/mL
Doses / vial
1
Your mixing recipe

Add 0.5 mL BAC water to your 5 mg vial. Draw to 40.0 units on a U-100 syringe for a 4 mg dose. This vial will last 1 dose.

A reminder for 4 mg (40 units) every day, with a free account.

Dose math and a schedule you can keep.

Syringe units in one tap. A free account adds dose reminders and calendar sync, plus alerts on the peptides you save.

Track every dose with reminders and a calendar.

  • Dose remindersPush or calendar alarm
  • Peptide alertsFor peptides you save
  • Calendar syncApple, Google, Outlook
  • Supply countsDoses left per vial

Your plans, logs and saved peptides sync to every device.

Opens a preview of your schedule first.

Your logs and saved lists are never sold, and not shared except where you choose.

What you need to mix this6 items, matched to your vial, BAC water and syringe
  • SS-31 (Elamipretide), 5 mg vialThe vial size set in the calculator.
  • Bacteriostatic water, 0.5 mLPrescription-only in the US, so it is dispensed by a pharmacy on a clinician's prescription.
  • 1 mL U-100 insulin syringe (100 units)Matches the syringe set in the calculator. Use a new sterile one for every injection.
  • Alcohol swabsFor each vial stopper every time a needle goes in, and for the injection site. Let the alcohol dry first.
  • A sharps containerUsed syringes go in right after each injection, never loose in the trash.
  • Storage after mixingNo published stability data exist for reconstituted research-grade SS-31. Community reports keep the mixed vial at 2-8°C and use it within 28 days. Avoid repeated freeze-thaw cycles.

How to choose each item: the peptide supplies guide.

Open SS-31 (Elamipretide) details
Side effects, protocols by goal, storage, and the sources behind these dosing numbers.

About SS-31 (Elamipretide)

Turns your vial size, BAC water, and dose into exact syringe units. Free to use.

SS-31 (elamipretide) earned FDA accelerated approval for Barth syndrome in September 2025, targeting mitochondrial cardiolipin to restore energy production. Community users run 2 to 10 mg daily for fatigue and longevity. Injection site reactions affect nearly everyone at some point.

Mitochondrial PeptideCardiolipin StabilizerAnti-AgingEnergy ProductionBarth SyndromeNeuroprotection
Ben PakulskiGary Brecka
Used by Pakulski, Brecka
Subcutaneous. Typical beginner frequency: daily.At beginner dose (4 mg) with a 5mg/0.5mL vial: draw to the 40-unit mark on a U-100 syringe.
After reconstituting, store at 2-8°C (36-46°F) once mixed (community reports). No published stability data exist for reconstituted research-grade SS-31. Community reports keep the mixed vial at 2-8°C and use it within 28 days. Avoid repeated freeze-thaw cycles.

View side effects and safety warnings →

Quick-Start: Reconstitution

  1. 1Wash hands thoroughly and clean the vial stopper with an alcohol swab.
  2. 2Research-grade powder only: draw bacteriostatic water into a syringe. Use 1 mL for a 10 mg vial (gives 10 mg/mL) or 4 mL for a 40 mg vial (same 10 mg/mL concentration). Inject water down the side of the vial, not directly onto the powder.
  3. 3Swirl gently until dissolved. SS-31 dissolves quickly. Do not shake.
Full injection guide →
Need a different vial size? Open the universal SS-31 (Elamipretide) reconstitution calculator to enter any vial mg + BAC water mL.

SS-31 (Elamipretide) Dosing Protocol

CommunityBeginner and moderate tiers are community doses of 4-10 mg SC daily, from research-grade powder mixed with BAC water. The aggressive tier is the FORZINITY label dose, 40 mg SC once daily for Barth syndrome in patients 30 kg and up. FORZINITY is a ready-to-use 80 mg/mL solution, so 40 mg is 0.5 mL with nothing mixed in (label sections 2.1, 3 and 11).
LevelDose / InjectionFrequency
Beginner4 mgDaily
Moderate10 mgDaily
Aggressive40 mgThis is the FORZINITY label dose for Barth syndrome in patients 30 kg and up (label section 2.1). FORZINITY is a ready-to-use 80 mg/mL solution, so 40 mg is 0.5 mL drawn straight from the vial with nothing added (sections 3 and 11). SS-31 vial and BAC water math applies to research-grade powder only.Daily
Note:

Reconstitution math first, for research-grade powder vials. A 10 mg vial with 1 mL bacteriostatic water gives you 10 mg/mL. At that concentration, 4 mg equals 40 units on a U-100 insulin syringe (0.4 mL). A 10 mg dose takes the full syringe (100 units, 1.0 mL). For the 40 mg vial, add 4 mL BAC water for the same 10 mg/mL concentration; 10 mg is still 100 units, but you get four doses per vial instead of one.

FORZINITY, the FDA-approved product, skips all of this. It is a ready-to-use 80 mg/mL solution in a 280 mg/3.5 mL vial (label section 3). Its 40 mg dose is 0.5 mL, drawn with the syringe your healthcare provider prescribes (sections 2.1 and 11, Instructions for Use).

Morning dosing is the community standard. There is no meal timing requirement.

You'll want to pre-treat injection sites. Cetirizine 10 mg taken 30 minutes before your shot makes a real difference for the first few weeks. Rotate between abdomen and upper thigh, and inject slowly. The site reactions are the number one reason people quit early.

Get a CBC at baseline and again at week 8. The eosinophilia is expected, but you want a record showing it was absent before you started.

No published stability data exist for reconstituted research-grade SS-31. Community reports keep sealed powder at -20°C and the mixed vial at 2-8°C for up to 28 days. Keep unopened FORZINITY vials at 2-8°C and never freeze them. After the first dose, an opened vial can stay at 2-8°C or at 20-25°C; discard it 8 days after first opening (label section 16.2).

Dosing based on Beginner and moderate tiers are community doses of 4-10 mg SC daily, from research-grade powder mixed with BAC water. The aggressive tier is the FORZINITY label dose, 40 mg SC once daily for Barth syndrome in patients 30 kg and up. FORZINITY is a ready-to-use 80 mg/mL solution, so 40 mg is 0.5 mL with nothing mixed in (label sections 2.1, 3 and 11).: 9 published references.View all sources →

How the SS-31 (Elamipretide) Math Works

5mg in 0.5mL
=10mg/mL
10mg/mL
=0.1 mg per unit
4 mg / 0.1
=40 units
5mg / 4 mg
=1 dose

Based on a 5mg vial, 0.5mL of bacteriostatic water, the beginner dose (4 mg), and a U-100 syringe. Change any input in the calculator and every line moves with it.

Ask AI about this math

Cross-check your SS-31 (Elamipretide) reconstitution math with AI

SS-31 (Elamipretide) Cost

Brand Price
FORZINITY (elamipretide HCl injection): Stealth BioTherapeutics; orphan drug pricing not publicly disclosed; estimated $50,000–$200,000+/year for clinical use in Barth syndrome (US orphan drug range)
Generic / Research
Not available: recently approved (Sept 2025); no generic pathway established
Compounded
Research-grade: $50–$80 per 10 mg vial; 40 mg vials also exist. At 10 mg/day: ~$1,500–$2,400/month (10 mg vials) or significantly lower per-mg cost with 40 mg vials.

Pricing updated 2026-04-09

Prices are estimates and vary by source, location, and prescription status.Full pricing breakdown →

SS-31 (Elamipretide) Pharmacokinetics

Pharmacokinetics: Active Dose Over Time

t½ = ~4 hours
50%25%12.5%100%75%50%25%0%04h8h12h16h20hTime after injectionDose remaining
After 1 half-life (4h): 50% remainsAfter 2 half-lives (8h): 25% remainsAfter 3 half-lives (12h): 12.5% remains
At a 10 mg dose: 50% = 5 mg remaining after 4h. Moderate-tier frequency in our sources: Daily.

Disclaimer: This curve is a simplified first-order exponential decay model. Actual pharmacokinetics vary based on injection site, individual metabolism, body composition, and other factors. Half-life values are approximate and based on available preclinical and clinical literature. Many research peptides lack formal human pharmacokinetic studies. This is for educational purposes only, not medical advice.

Read the full SS-31 (Elamipretide) guide →Best Peptides for Anti-Aging →

Related Tools

Frequently Asked Questions

It depends on your vial size, BAC water, and dose. For a 5mg vial with 0.5mL BAC water, a beginner dose of 4mg is typically 40 units on a U-100 syringe. Use the calculator above for your exact numbers.

The standard amount is 0.5mL of bacteriostatic water for a 5mg vial. More water gives a more dilute solution, so the same dose fills more of the syringe and is easier to measure. Less water makes the draw smaller and harder to read. The number of doses per vial does not change either way, since that depends only on vial size and dose. Adjust the BAC water slider in the calculator to see how it changes your syringe units.

At a beginner dose of 4mg daily, a 5mg vial lasts about 1 dose. The calculator shows exact doses per vial for your selected tier.

Most people use a 1mL U-100 insulin syringe (100 units). For very small doses, a 0.5mL or 0.3mL barrel is easier to read. All three are U-100 graduated, so the number of units to draw is the same on each. Veterinary U-40 syringes are a different scale and the calculator adjusts for that separately.

Store reconstituted SS-31 (Elamipretide) at 2-8°C (36-46°F) once mixed (community reports). No published stability data exist for reconstituted research-grade SS-31. Community reports keep the mixed vial at 2-8°C and use it within 28 days. Avoid repeated freeze-thaw cycles. Unopened vials: Community reports store sealed research-grade powder at -20°C. FORZINITY is a ready-to-use solution, not a powder. Refrigerate unopened FORZINITY vials at 2-8°C (36-46°F) and do not freeze them. After the first dose, keep an opened vial at 2-8°C or at 20-25°C (68-77°F), and discard it 8 days after first opening (label section 16.2).