Skip to content

Not medical advice. Talk to your provider before using any peptide. Full disclaimer

Peptide Schedule Research TeamReviewed Apr 7, 20266 Citations

SLU-PP-332 iconSLU-PP-332Small moleculeNo amino acid sequence. Icon reflects category theme only.

SLU-PP-332 Dosage Calculator

Metabolic · Research · Grade C · ~4-6 hours half-life (estimated) · Injection

Calculate your dose

Adjust vial, water and dose. The answer updates live.

mL
Dose
Syringe

All three take the same units for the same dose. A smaller barrel just spreads it over more space.

↓ 50.0020406080100
Draw to 50.0 units= 0.500 mL

on a U-100 syringe for a 10 mg = 10,000 mcg dose

Check that your syringe says U-100.

Concentration
20,000
mcg/mL
Doses / vial
1
Your mixing recipe

Add 0.5 mL BAC water to your 10 mg vial. Draw to 50.0 units on a U-100 syringe for a 10 mg dose. This vial will last 1 dose.

A reminder for 10 mg (50 units) every day, with a free account.

Dose math and a schedule you can keep.

Syringe units in one tap. A free account adds dose reminders and calendar sync, plus alerts on the peptides you save.

Track every dose with reminders and a calendar.

  • Dose remindersPush or calendar alarm
  • Peptide alertsFor peptides you save
  • Calendar syncApple, Google, Outlook
  • Supply countsDoses left per vial

Your plans, logs and saved peptides sync to every device.

Opens a preview of your schedule first.

Your logs and saved lists are never sold, and not shared except where you choose.

Open SLU-PP-332 details
Side effects, protocols by goal, storage, and the sources behind these dosing numbers.

About SLU-PP-332

Turns your vial size, BAC water, and dose into exact syringe units. Free to use.

SLU-PP-332 is a synthetic ERR agonist that mimics aerobic exercise at the gene level. Mouse data show 12% weight loss and 70% longer running times in 28 days. No human trials exist. Community protocols use 10 to 50 mg/day subcutaneous injection.

Mitochondrial SupportFat LossPerformance EnhancementBody Recomposition
Intraperitoneal (animal studies); route for human use not established. Typical beginner frequency: daily.At beginner dose (10 mg) with a 10mg/0.5mL vial: draw to the 50-unit mark on a U-100 syringe.
After reconstituting, store at -20°C (long-term) or 2-8°C (short-term). Store at 2-8°C in DMSO or appropriate vehicle, use within 2 weeks.

View side effects and safety warnings →

Quick-Start: Reconstitution

  1. 1Check your vial label. Common sizes are 10 mg and 25 mg. Verify lot-specific certificate of analysis (COA) with HPLC purity of 99% or higher.
  2. 2Add bacteriostatic water slowly. For a 25 mg vial, add 1 mL. For a 10 mg vial, add 0.5 mL. Swirl gently until fully dissolved. Do not inject if any visible powder or particles remain; injection site lumps come from undissolved material.
  3. 3Draw your dose. For a 10 mg dose from a 25 mg/1 mL vial: draw to 40 IU on a U100 insulin syringe (0.4 mL). For a 25 mg dose from the same vial: draw the full 100 IU (1.0 mL) and consider splitting across two injection sites.
Full injection guide →
Need a different vial size? Open the universal SLU-PP-332 reconstitution calculator to enter any vial mg + BAC water mL.

SLU-PP-332 Dosing Protocol

SpeculativePreclinical data only: no human dosing data established
LevelDose / InjectionFrequency
Beginner10 mgDaily
Moderate25 mgDaily
Aggressive50 mgDaily
Note:

This is a small molecule, not a peptide. Reconstitution math depends on your vial and solvent choice. SLU-PP-332 dissolves in DMSO or can be reconstituted with bacteriostatic water for subcutaneous injection.

For a 25 mg vial reconstituted with 1 mL bacteriostatic water: concentration is 25 mg/mL. A 10 mg dose is 40 IU on a U100 insulin syringe (0.4 mL). A 25 mg dose uses the full syringe (100 IU / 1.0 mL); consider splitting across two injection sites at that volume.

For a 10 mg vial reconstituted with 0.5 mL: concentration is 20 mg/mL. A 10 mg dose is 50 IU (0.5 mL).

The mcg versus mg confusion tripped up a lot of early adopters. If you're dosing in the 250 to 1,500 mcg range, you're almost certainly too low. Community consensus settled on 10 to 50 mg/day subcutaneous as the effective range. Oral bioavailability is widely described as "nearly useless" for hitting meaningful plasma levels.

Get an ECG before your first cycle. That's the single most important safety step given the cardiac data.

Dosing based on Preclinical data only: no human dosing data established: 6 published references.View all sources →

How the SLU-PP-332 Math Works

10mg in 0.5mL
=20mg/mL
20mg/mL
=0.2 mg per unit
10 mg / 0.2
=50 units
10mg / 10 mg
=1 dose

Based on a 10mg vial, 0.5mL of bacteriostatic water, the beginner dose (10 mg), and a U-100 syringe. Change any input in the calculator and every line moves with it.

Ask AI about this math

Cross-check your SLU-PP-332 reconstitution math with AI

SLU-PP-332 Cost

Generic / Research
Bulk research chemical powder (≥99% HPLC): $32/g (1g), $102/10g ($10.20/g), $560/100g ($5.60/g). At 25mg/day from 100g purchase: ~$0.26/day. Oral consumer capsules: ~$49.99/30 capsules at 250mcg = ~$6.67/mg: not cost-effective for mg-level SC protocols.

Pricing updated 2026-04-09

Prices are estimates and vary by source, location, and prescription status.Full pricing breakdown →

SLU-PP-332 Pharmacokinetics

Pharmacokinetics: Active Dose Over Time

t½ = ~4-6 hours (estimated from murine PK)
50%25%12.5%100%75%50%25%0%05h10h15h20h25hTime after injectionDose remaining
After 1 half-life (5h): 50% remainsAfter 2 half-lives (10h): 25% remainsAfter 3 half-lives (15h): 12.5% remains
At a 25 mg dose: 50% = 12.5 mg remaining after 5h. Moderate-tier frequency in our sources: Daily.

Disclaimer: This curve is a simplified first-order exponential decay model. Actual pharmacokinetics vary based on injection site, individual metabolism, body composition, and other factors. Half-life values are approximate and based on available preclinical and clinical literature. Many research peptides lack formal human pharmacokinetic studies. This is for educational purposes only, not medical advice.

Read the full SLU-PP-332 guide →

Related Tools

Frequently Asked Questions

It depends on your vial size, BAC water, and dose. For a 10mg vial with 0.5mL BAC water, a beginner dose of 10mg is typically 50 units on a U-100 syringe. Use the calculator above for your exact numbers.

The standard amount is 0.5mL of bacteriostatic water for a 10mg vial. More water gives a more dilute solution, so the same dose fills more of the syringe and is easier to measure. Less water makes the draw smaller and harder to read. The number of doses per vial does not change either way, since that depends only on vial size and dose. Adjust the BAC water slider in the calculator to see how it changes your syringe units.

At a beginner dose of 10mg daily, a 10mg vial lasts about 1 dose. The calculator shows exact doses per vial for your selected tier.

Most people use a 1mL U-100 insulin syringe (100 units). For very small doses, a 0.5mL or 0.3mL barrel is easier to read. All three are U-100 graduated, so the number of units to draw is the same on each. Veterinary U-40 syringes are a different scale and the calculator adjusts for that separately.

Store reconstituted SLU-PP-332 at -20°C (long-term) or 2-8°C (short-term). Store at 2-8°C in DMSO or appropriate vehicle, use within 2 weeks. Unopened vials: Store at -20°C, desiccated, protected from light: stable for 12+ months.