Skip to content

Not medical advice. Talk to your provider before using any peptide. Full disclaimer

Peptide Schedule Research TeamReviewed Apr 7, 202618 Citations

KLOW Blend (BPC-157 + TB-500 + GHK-Cu + KPV) peptide iconKLOW Blend (BPC-157 + TB-500 + GHK-Cu + KPV)22 residues (approx.)GEPPPGKPADDAGLVLKKTETQEach bubble = one amino acid. Size = residue mass. Color = chemical class.Uses closest standard amino acids for non-standard residues.

KLOW Blend (BPC-157 + TB-500 + GHK-Cu + KPV) Dosage Calculator

Healing & Recovery · Research · Grade C · Varies by component half-life · Injection

Calculate your dose

Adjust vial, water and dose. The answer updates live.

mL
Dose
Syringe

All three take the same units for the same dose. A smaller barrel just spreads it over more space.

↓ 7.5020406080100
Draw to 7.5 units= 0.075 mL

on a U-100 syringe for a 2,000 mcg = 2 mg dose

Check that your syringe says U-100.

What this draw delivers
GHK-Cu 1,250 mcgBPC-157 250 mcgTB-500 250 mcgKPV 250 mcg

Assumes the pre-blended 80 mg vial, 5:1:1:1 GHK-Cu : BPC-157 : TB-500 : KPV.

Concentration
26,666.667
mcg/mL
Doses / vial
40
Cost / dose
$1.63–9.50
Range
Your mixing recipe

Add 3 mL BAC water to your 80 mg vial. Draw to 7.5 units on a U-100 syringe for a 2 mg dose. This vial will last 40 doses.

A reminder for 2 mg (7.5 units) every day, with a free account.

Dose math and a schedule you can keep.

Syringe units in one tap. A free account adds dose reminders and calendar sync, plus alerts on the peptides you save.

Track every dose with reminders and a calendar.

  • Dose remindersPush or calendar alarm
  • Peptide alertsFor peptides you save
  • Calendar syncApple, Google, Outlook
  • Supply countsDoses left per vial

Your plans, logs and saved peptides sync to every device.

Opens a preview of your schedule first.

Your logs and saved lists are never sold, and not shared except where you choose.

What you need to mix this6 items, matched to your vial, BAC water and syringe
  • KLOW Blend (BPC-157 + TB-500 + GHK-Cu + KPV), 80 mg vialThe vial size set in the calculator.
  • Bacteriostatic water, 3 mLPrescription-only in the US, so it is dispensed by a pharmacy on a clinician's prescription.
  • 1 mL U-100 insulin syringe (100 units)Matches the syringe set in the calculator. Use a new sterile one for every injection.
  • Alcohol swabsFor each vial stopper every time a needle goes in, and for the injection site. Let the alcohol dry first.
  • A sharps containerUsed syringes go in right after each injection, never loose in the trash.
  • Storage after mixingRefrigerate at 2-8°C, use within 4 weeks.

How to choose each item: the peptide supplies guide.

About KLOW Blend (BPC-157 + TB-500 + GHK-Cu + KPV)

Turns your vial size, BAC water, and dose into exact syringe units. Free to use.

KLOW Blend packs BPC-157, TB-500, GHK-Cu, and KPV into one 80mg recovery vial. Community users report improved skin elasticity and gut comfort during GLP-1 therapy. No human trials exist for the combined formulation, but individual component data spans hundreds of preclinical studies.

Recovery StackBody RecompositionGut HealthAnti-InflammatoryTissue Repair
Subcutaneous. Typical beginner frequency: daily.At beginner dose (2000 mcg) with a 80mg/3mL vial: draw to the 7.5-unit mark on a U-100 syringe.
After reconstituting, store at 2-8°C (36-46°F) after reconstitution. Refrigerate at 2-8°C, use within 4 weeks.

View side effects and safety warnings →

Quick-Start: Reconstitution

  1. 1Remove the flip-top cap from the 80mg lyophilized KLOW vial. Wipe the rubber stopper with an alcohol swab.
  2. 2Draw 3mL of bacteriostatic water into a syringe. Inject it slowly down the inside wall of the vial. Do not spray directly onto the peptide cake.
  3. 3Swirl gently until fully dissolved. Do not shake. The solution should be clear with no visible particles.
Full injection guide →
Need a different vial size? Open the universal KLOW Blend (BPC-157 + TB-500 + GHK-Cu + KPV) reconstitution calculator to enter any vial mg + BAC water mL.

KLOW Blend (BPC-157 + TB-500 + GHK-Cu + KPV) Dosing Protocol

CommunityCommunity protocol combining multiple research peptides
LevelDose / InjectionFrequency
Beginner2 mgDaily
Moderate4 mgAbove the ceiling stated by both consensus lines on this page (2,000 mcg per day total). Delivers 2,500 mcg GHK-Cu, above the 1 to 2 mg per day community range.Daily
Aggressive4.8 mgAbove the ceiling stated by both consensus lines on this page. Delivers 3,000 mcg GHK-Cu, the top of the injectable range on the GHK-Cu page. It also delivers 600 mcg each of BPC-157 and KPV, above the 500 mcg per day top of the community range this page quotes for both. Do not exceed without prescriber oversight.Daily
Note:

Reconstitution math for the 80mg vial: add 3mL bacteriostatic water to get 26.7mg/mL. At that concentration, 7.5 units on a 100-unit insulin syringe delivers 2000mcg (the beginner dose), 15 units delivers 4000mcg, and 18 units delivers 4800mcg. Going with 4mL instead gives you 20mg/mL with slightly larger but easier-to-measure draw volumes, but then every unit figure on this page has to be recalculated. All of them assume 3mL.

Swirl the vial gently after adding bac water. Don't shake it. Peptides aren't cocktails.

The blend ratio is fixed at 5:1:1:1 (GHK-Cu : BPC-157 : TB-500 : KPV). At beginner dose (2000mcg/day) you're getting GHK-Cu 1250mcg, BPC-157 250mcg, TB-500 250mcg, and KPV 250mcg. That BPC-157 number is within its typical standalone range. The TB-500 number (250mcg daily, or ~1.75mg per week) is structurally different from the standard TB-500 protocol (2 to 5mg bolus twice per week). Whether daily low-dose TB-500 equals bolus dosing is unknown.

One vial at beginner dose lasts about 40 days. At moderate (4000mcg/day) you'll burn through it in roughly 20 days.

Pin once daily, preferably in the evening. Rotate between at least four injection sites (left/right abdomen, left/right outer thigh).

Dosing based on Community protocol combining multiple research peptides: 18 published references.View all sources →

How the KLOW Blend (BPC-157 + TB-500 + GHK-Cu + KPV) Math Works

80mg in 3mL
=26.67mg/mL
26.67mg/mL
=266.7 mcg per unit
2,000 mcg / 266.7
=7.5 units
80mg / 2,000 mcg
=40 doses

Based on a 80mg vial, 3mL of bacteriostatic water, the beginner dose (2,000 mcg), and a U-100 syringe. Change any input in the calculator and every line moves with it.

Ask AI about this math

Cross-check your KLOW Blend (BPC-157 + TB-500 + GHK-Cu + KPV) reconstitution math with AI

KLOW Blend (BPC-157 + TB-500 + GHK-Cu + KPV) Cost

Generic / Research
$65–$380/vial (observed research-grade market range, 80mg vial). Typical single-vial price ~$100–$135. Bulk pricing (10-vial kits) drops the per-vial cost to ~$46, which is a volume discount rather than a quality signal.
Compounded
Available from select compounding pharmacies; legal status uncertain for BPC-157 and GHK-Cu post-FDA Category 2 classification. Estimated $99–$200/vial compounded.

Pricing updated 2026-04-09

Prices are estimates and vary by source, location, and prescription status.Full pricing breakdown →

Read the full KLOW Blend (BPC-157 + TB-500 + GHK-Cu + KPV) guide →

Related Tools

Frequently Asked Questions

It depends on your vial size, BAC water, and dose. For a 80mg vial with 3mL BAC water, a beginner dose of 2000mcg is typically 7.5 units on a U-100 syringe. Use the calculator above for your exact numbers. These totals apply to the pre-blended 80 mg vial, 5:1:1:1 GHK-Cu : BPC-157 : TB-500 : KPV. Doses for separate component vials are set per component and are not the totals above. Ratios vary between products, so check the COA.

The standard amount is 3mL of bacteriostatic water for a 80mg vial. More water gives a more dilute solution, so the same dose fills more of the syringe and is easier to measure. Less water makes the draw smaller and harder to read. The number of doses per vial does not change either way, since that depends only on vial size and dose. Adjust the BAC water slider in the calculator to see how it changes your syringe units.

At a beginner dose of 2000mcg daily, a 80mg vial lasts about 40 doses. The calculator shows exact doses per vial for your selected tier. These totals apply to the pre-blended 80 mg vial, 5:1:1:1 GHK-Cu : BPC-157 : TB-500 : KPV. Doses for separate component vials are set per component and are not the totals above. Ratios vary between products, so check the COA.

Most people use a 1mL U-100 insulin syringe (100 units). For very small doses, a 0.5mL or 0.3mL barrel is easier to read. All three are U-100 graduated, so the number of units to draw is the same on each. Veterinary U-40 syringes are a different scale and the calculator adjusts for that separately.

Store reconstituted KLOW Blend (BPC-157 + TB-500 + GHK-Cu + KPV) at 2-8°C (36-46°F) after reconstitution. Refrigerate at 2-8°C, use within 4 weeks. Unopened vials: Room temperature during shipping, refrigerate at 2-8°C for up to 12 months.