Skip to content

Not medical advice. Talk to your provider before using any peptide. Full disclaimer

Peptide Schedule Research TeamReviewed Apr 7, 20267 Citations

IGF-1 LR3 peptide icon, one bubble per amino acidIGF-1 LR383 residuesMFPAMPLSSLFVNGPRTLCGAELVDALQFVCGDRGFYFNKPTGYGSSSRRAPQTGIVDECCFRSCDLRRLEMYCAPLKPAKSAEach bubble = one amino acid. Size = residue mass. Color = chemical class.

IGF-1 LR3 Dosage Calculator

Anti-Aging · Research · Grade C · ~20-30 hours half-life · Injection

Calculate your dose

Adjust vial, water and dose. The answer updates live.

mL
Dose
Syringe

All three take the same units for the same dose. A smaller barrel just spreads it over more space.

↓ 2.0020406080100
Draw to 2.0 units= 0.020 mL

on a U-100 syringe for a 20 mcg = 0.02 mg dose

Check that your syringe says U-100.

Concentration
1,000
mcg/mL
Doses / vial
50
Cost / dose
$1.20–1.92
Range · View
80 US pricesOct 31
Your mixing recipe

Add 1 mL BAC water to your 1 mg vial. Draw to 2.0 units on a U-100 syringe for a 20 mcg dose. This vial will last 50 doses.

A reminder for 20 mcg (2 units) every day, with a free account.

Dose math and a schedule you can keep.

Syringe units in one tap. A free account adds dose reminders and calendar sync, plus alerts on the peptides you save.

Track every dose with reminders and a calendar.

  • Dose remindersPush or calendar alarm
  • Peptide alertsFor peptides you save
  • Calendar syncApple, Google, Outlook
  • Supply countsDoses left per vial

Your plans, logs and saved peptides sync to every device.

Opens a preview of your schedule first.

Your logs and saved lists are never sold, and not shared except where you choose.

What you need to mix this6 items, matched to your vial, BAC water and syringe
  • IGF-1 LR3, 1 mg vialThe vial size set in the calculator.
  • Bacteriostatic water, 1 mLPrescription-only in the US, so it is dispensed by a pharmacy on a clinician's prescription.
  • 1 mL U-100 insulin syringe (100 units)Matches the syringe set in the calculator. Use a new sterile one for every injection.
  • Alcohol swabsFor each vial stopper every time a needle goes in, and for the injection site. Let the alcohol dry first.
  • A sharps containerUsed syringes go in right after each injection, never loose in the trash.
  • Storage after mixingRefrigerate at 2-8°C, use within 30 days. Add 0.1% BSA or acetic acid to prevent adsorption to vial walls.

How to choose each item: the peptide supplies guide.

Open IGF-1 LR3 details
Side effects, protocols by goal, storage, and the sources behind these dosing numbers.

About IGF-1 LR3

Turns your vial size, BAC water, and dose into exact syringe units. Free to use.

IGF-1 LR3 delivers 20 to 30 hours of active IGF-1 receptor stimulation per injection, far outlasting native IGF-1. Users report lean mass gains and faster recovery in 4 to 6 week cycles. No human RCT exists for anabolic use; hypoglycemia and organ growth concerns keep dosing conservative at 20 to 50 mcg per day.

IGF-1 AnalogMuscle GrowthAnabolicGrowth Factor
Subcutaneous or Intramuscular. Typical beginner frequency: daily.At beginner dose (20 mcg) with a 1mg/1mL vial: draw to the 2-unit mark on a U-100 syringe.
After reconstituting, store at -20°C long-term; 2-8°C short-term. Refrigerate at 2-8°C, use within 30 days. Add 0.1% BSA or acetic acid to prevent adsorption to vial walls.

View side effects and safety warnings →

Quick-Start: Reconstitution

  1. 1Gather supplies: 1mg IGF-1 LR3 lyophilized vial, 1.0 mL bacteriostatic water, U-100 insulin syringe (29 to 31 gauge), alcohol swabs.
  2. 2Clean both vial stoppers with alcohol swabs. Draw 1.0 mL (100 units) of bacteriostatic water into a syringe. Inject slowly down the inside wall of the LR3 vial. Swirl gently until dissolved. Never shake.
  3. 3Draw your dose using a fresh insulin syringe. For a 20 mcg dose, draw to the 2 IU mark. For 40 mcg, draw to the 4 IU mark. For 80 mcg, draw to the 8 IU mark.
Full injection guide →
Need a different vial size? Open the universal IGF-1 LR3 reconstitution calculator to enter any vial mg + BAC water mL.

IGF-1 LR3 Dosing Protocol

CommunityCommunity dosing consensus from peptide research communities
LevelDose / InjectionFrequency
Beginner20 mcgDaily
Moderate40 mcgDaily
Aggressive80 mcgDaily
Note:

Reconstitution math for a 1mg vial: add 1.0 mL bacteriostatic water. That gives you 1,000 mcg per mL. On a U-100 insulin syringe, each unit (tick mark) equals 10 mcg. So 2 IU = 20 mcg (beginner dose), 4 IU = 40 mcg (moderate), 8 IU = 80 mcg (aggressive).

One vial at 40 mcg per day lasts 25 days, enough for a full 4-week cycle with one day to spare. At the beginner dose, a single vial covers 50 days.

Store reconstituted vials refrigerated at 2 to 8 degrees C. Discard after 28 to 30 days. Never freeze reconstituted solution.

The thing most beginners miss: eat within 15 to 30 minutes of injecting. Post-workout timing is popular because you'll be eating anyway. Morning fasted works too, just have food ready before you pin.

Get baseline bloodwork (serum IGF-1, fasting glucose, HbA1c) before your first cycle. If your natural IGF-1 is already high-normal or above, adding LR3 on top increases proliferation risk.

Dosing based on Community dosing consensus from peptide research communities: 7 published references.View all sources →

How the IGF-1 LR3 Math Works

1mg in 1mL
=1mg/mL
1mg/mL
=10 mcg per unit
20 mcg / 10
=2 units
1mg / 20 mcg
=50 doses

Based on a 1mg vial, 1mL of bacteriostatic water, the beginner dose (20 mcg), and a U-100 syringe. Change any input in the calculator and every line moves with it.

Ask AI about this math

Cross-check your IGF-1 LR3 reconstitution math with AI

IGF-1 LR3 Pharmacokinetics

Pharmacokinetics: Active Dose Over Time

t½ = ~20-30 hours
50%25%12.5%100%75%50%25%0%025h2d3d4d5dTime after injectionDose remaining
After 1 half-life (25h): 50% remainsAfter 2 half-lives (2d): 25% remainsAfter 3 half-lives (3d): 12.5% remains
At a 40 mcg dose: 50% = 20 mcg remaining after 25h. Moderate-tier frequency in our sources: Daily.

Disclaimer: This curve is a simplified first-order exponential decay model. Actual pharmacokinetics vary based on injection site, individual metabolism, body composition, and other factors. Half-life values are approximate and based on available preclinical and clinical literature. Many research peptides lack formal human pharmacokinetic studies. This is for educational purposes only, not medical advice.

Read the full IGF-1 LR3 guide →Best Peptides for Muscle Growth →

Related Tools

Frequently Asked Questions

It depends on your vial size, BAC water, and dose. For a 1mg vial with 1mL BAC water, a beginner dose of 20mcg is typically 2 units on a U-100 syringe. Use the calculator above for your exact numbers.

The standard amount is 1mL of bacteriostatic water for a 1mg vial. More water gives a more dilute solution, so the same dose fills more of the syringe and is easier to measure. Less water makes the draw smaller and harder to read. The number of doses per vial does not change either way, since that depends only on vial size and dose. Adjust the BAC water slider in the calculator to see how it changes your syringe units.

At a beginner dose of 20mcg daily, a 1mg vial lasts about 50 doses. The calculator shows exact doses per vial for your selected tier.

Most people use a 1mL U-100 insulin syringe (100 units). For very small doses, a 0.5mL or 0.3mL barrel is easier to read. All three are U-100 graduated, so the number of units to draw is the same on each. Veterinary U-40 syringes are a different scale and the calculator adjusts for that separately.

Store reconstituted IGF-1 LR3 at -20°C long-term; 2-8°C short-term. Refrigerate at 2-8°C, use within 30 days. Add 0.1% BSA or acetic acid to prevent adsorption to vial walls. Unopened vials: Store at -20°C for long-term (up to 2 years). Short-term storage at 2-8°C acceptable for up to 3 months.