How many units of GLOW Blend (BPC-157 + TB-500 + GHK-Cu) should I draw?

It depends on your vial size, BAC water, and dose. For a 70mg vial with 3mL BAC water, a beginner dose of 1400mcg is typically 6 units on a U-100 syringe. Use the calculator above for your exact numbers. These totals apply to the pre-blended 70 mg vial, 5:1:1 GHK-Cu : BPC-157 : TB-500. Doses for separate component vials are set per component and are not the totals above. Vendor ratios vary, so check the COA.

How much BAC water should I add to GLOW Blend (BPC-157 + TB-500 + GHK-Cu)?

The standard amount is 3mL of bacteriostatic water for a 70mg vial. More water gives a more dilute solution, so the same dose fills more of the syringe and is easier to measure. Less water makes the draw smaller and harder to read. The number of doses per vial does not change either way, since that depends only on vial size and dose. Adjust the BAC water slider in the calculator to see how it changes your syringe units.

How long does a GLOW Blend (BPC-157 + TB-500 + GHK-Cu) vial last?

At a beginner dose of 1400mcg daily, a 70mg vial lasts about 50 doses. The calculator shows exact doses per vial for your selected tier. These totals apply to the pre-blended 70 mg vial, 5:1:1 GHK-Cu : BPC-157 : TB-500. Doses for separate component vials are set per component and are not the totals above. Vendor ratios vary, so check the COA.

What syringe should I use for GLOW Blend (BPC-157 + TB-500 + GHK-Cu)?

Most people use a 1mL U-100 insulin syringe (100 units). For very small doses, a 0.5mL or 0.3mL barrel is easier to read. All three are U-100 graduated, so the number of units to draw is the same on each. Veterinary U-40 syringes are a different scale and the calculator adjusts for that separately.

How should I store GLOW Blend (BPC-157 + TB-500 + GHK-Cu) after reconstitution?

Store reconstituted GLOW Blend (BPC-157 + TB-500 + GHK-Cu) at 2-8°C (36-46°F) after reconstitution. Refrigerate at 2-8°C, use within 3-4 weeks. Before reconstitution: room temperature up to 1 month, refrigerate at 2-8°c for up to 12 months, freeze at −20°c only for storage beyond 12 months.

What is the recommended GLOW Blend dosage?

It depends on which product you have. A pre-blended 70 mg vial holds about 50 mg GHK-Cu, 10 mg BPC-157, and 10 mg TB-500, a 5:1:1 split fixed by the vendor. GHK-Cu is 71 percent of every draw, so the GHK-Cu dose sets the tier. A 1,400 mcg draw delivers 1,000 mcg GHK-Cu with 200 mcg each of BPC-157 and TB-500. A 2,330 mcg draw delivers about 1,670 / 330 / 330, which is the dose the originating protocol describes. A 2,800 mcg draw delivers 2,000 / 400 / 400. You cannot move one component without moving all three. With separate vials you set each dose yourself. Community reports use GHK-Cu 2 mg per day, BPC-157 500 mcg per day, and TB-500 2 mg twice weekly. The originating protocol instead says to hold the 5:1:1 ratio when dosing separately. Those two do not agree and neither has trial support, so treat the choice as one to make with a prescriber. Vendor ratios vary. Check the COA before you calculate anything.

Not medical advice. Talk to your provider before using any peptide.

Full disclaimer

Peptide Schedule Research TeamReviewed Apr 202611 Citations

GLOW Blend (BPC-157 + TB-500 + GHK-Cu) Dosage Calculator

Turns your vial size, BAC water, and dose into exact syringe units. Free, no signup.

Healing & RecoveryResearchGrade C·Varies by component half-life·Injection·6w on / 2w off

17 refsVerified 2026-04-07

Calculate your dose

Adjust vial, water, and dose — answer updates live

Live

Vial Size

BAC Water (mL)

Dose Tier

1.4mg · Daily

Custom Dose (mcg) optional

Syringe

All three take the same units for the same dose. A smaller barrel just spreads it over more space.

Draw to 6.0 units= 0.060 mL

on a U-100 syringe for a 1.4mg dose

What this draw delivers

GHK-Cu 1,000 mcgBPC-157 200 mcgTB-500 200 mcg

Assumes the pre-blended 70 mg vial, 5:1:1 GHK-Cu : BPC-157 : TB-500.

Concentration

23,333.333

mcg/mL

Doses / vial

Cost / dose

Your mixing recipe

Add 3 mL BAC water to your 70 mg vial. Draw to 6.0 units on a U-100 syringe for a 1.4mg dose. This vial will last 50 doses.

Double-check with AI GLOW Blend (BPC-157 + TB-500 + GHK-Cu) profile

Copy link saves these numbers in the address. Anyone who opens it sees the same draw.

Save this as a tracked protocol

Never miss a dose — 1.4mg daily, draw 6.0 units on U-100 syringe.

Calendar sync

Apple · Google · Outlook

Daily reminders

Never miss a dose

Dose tracking

See adherence streaks

Cycle planning

Auto on/off weeks

Tracking needs a free account, about 20 seconds
The calculator stays free without one

Save this as a tracked protocol

Never miss a dose — 1.4mg daily, draw 6.0 units on U-100 syringe.

Calendar sync

Apple · Google · Outlook

Daily reminders

Never miss a dose

Dose tracking

See adherence streaks

Cycle planning

Auto on/off weeks

Tracking needs a free account, about 20 seconds
The calculator stays free without one

Cycle Length (weeks)

Price Per Vial ($) — optional

Open GLOW Blend (BPC-157 + TB-500 + GHK-Cu) details

Side effects, protocols by goal, storage, and the sources behind these dosing numbers.

About GLOW Blend (BPC-157 + TB-500 + GHK-Cu)

The GLOW Blend adds GHK-Cu to the Wolverine Stack for three-pathway healing: local tissue repair, systemic inflammation control, and collagen remodeling. Community reports are strong; human clinical data is nonexistent for the combination. Community cycles run 4 to 8 weeks with a 2-week minimum break.

Tissue RepairRecoveryStackAnti-InflammatoryCollagen

Popular200+High

Subcutaneous. Typical beginner frequency: daily.At beginner dose (1400mcg) with a 70mg/3mL vial: draw to the 6-unit mark on a U-100 syringe.

After reconstituting, store at 2-8°C (36-46°F) after reconstitution (refrigerate at 2-8°c, use within 3-4 weeks).

View side effects and safety warnings →

Quick-Start: Reconstitution

1Gather supplies: reconstituted GLOW vial (or separate component vials), alcohol swabs, 29 or 31 gauge insulin syringe (U-100, 0.5 mL or 1 mL), and a sharps container.
2Clean the vial stopper with an alcohol swab. Draw the calculated dose. For the pre-blended 70mg vial in 3 mL bac water (23.3 mg/mL): beginner 1,400 mcg = 6 units; moderate 2,330 mcg = 10 units; aggressive 2,800 mcg = 12 units.
3Separate-vial format only. If you bought three component vials instead of a pre-blended one, draw each peptide into a separate syringe. These numbers do not apply to the pre-blended vial in step 2. BPC-157 and TB-500 assume 10mg vials in 2 mL bac water (5 mg/mL): BPC-157 500 mcg = 10 units, TB-500 2 mg = 40 units (twice weekly only, not daily). GHK-Cu assumes the 50mg vial in 5 mL bac water (10 mg/mL) the GHK-Cu page uses: 2 mg = 20 units.

Full injection guide→

Need a different vial size? Open the universal GLOW Blend (BPC-157 + TB-500 + GHK-Cu) reconstitution calculator to enter any vial mg + BAC water mL.

GLOW Blend (BPC-157 + TB-500 + GHK-Cu) Dosing Protocol

SpeculativeAnchored on the GHK-Cu component. Community range 1 to 2 mg per day; the originating GLOW protocol states the 5:1:1 ratio and no dose. Totals are ratio arithmetic on that anchor, shown on the page.

Level	Dose / Injection	Frequency
Beginner	1.4mg	Daily
Moderate	2.33mgMatches the dose the originating protocol describes: about 1,670 mcg GHK-Cu per injection.	Daily
Aggressive	2.8mgTop of the 1 to 2 mg per day community range for GHK-Cu. No source establishes a higher blend dose.	Daily

Note:

Your first decision with this stack is vial format. Pre-mixed 70mg vials (typically 50mg GHK-Cu, 10mg BPC-157, 10mg TB-500) simplify everything into one daily draw. Separate component vials cost more time but let you dose TB-500 twice weekly (the community-preferred frequency) and avoid copper-catalyzed oxidation in a shared solution. Reconstitution math for the 70mg vial with 3 mL bacteriostatic water: concentration is 23.3 mg/mL, so one unit on a U-100 insulin syringe holds about 233 mcg. The beginner tier of 1,400 mcg is 6 units. Moderate (2,330 mcg) is 10 units. Aggressive (2,800 mcg) is 12 units. Do not carry over syringe unit calculations between vial formats. The thing most beginners miss: budget pre-mixed vials may contain only 200 mcg of GHK-Cu per dose. That is 5 to 10 times below the effective community dose. Check the vendor COA for exact component milligram breakdown before buying.

Dosing based on Anchored on the GHK-Cu component. Community range 1 to 2 mg per day; the originating GLOW protocol states the 5:1:1 ratio and no dose. Totals are ratio arithmetic on that anchor, shown on the page. — 17 published references.View all sources →

How the GLOW Blend (BPC-157 + TB-500 + GHK-Cu) Math Works

70mg in 3mL: =23.33mg/mL
23.33mg/mL: =233.3mcg per unit
1,400mcg / 233.3: =6 units
70mg / 1,400mcg: =50 doses

Based on a 70mg vial, 3mL of bacteriostatic water, the beginner dose (1,400mcg), and a U-100 syringe. Change any input in the calculator and every line moves with it.

Verify your calculation

Cross-check your GLOW Blend (BPC-157 + TB-500 + GHK-Cu) reconstitution math with AI

GLOW Blend (BPC-157 + TB-500 + GHK-Cu) Cost

Generic / Research

70mg pre-mixed GLOW vial (50mg GHK-Cu + 10mg BPC-157 + 10mg TB-500): ~$175–$220/vial research-grade (e.g., Peptide Sciences, Alpha Omega Peptide, Simple Peptide). A 30mg vial format is also listed by some vendors at ~$80–$120, but the component ratio is not stated, so the per-component split on this page does not apply to it. Separate component monthly cost at full loading dose: ~$150–$300.

Compounded

Clinical compounding sessions (physician-supervised): ~$200–$400/treatment (e.g., IVs in the Keys clinic). Wolverine Stack (BPC+TB500 only) at clinics: ~$330/package (Our Family Health Center). Full GLOW at IV/peptide clinics: ~$300–$500/month.

Pricing updated 2026-04-09

Prices are estimates and vary by source, location, and prescription status.Full pricing breakdown →