Skip to content

Not medical advice. Talk to your provider before using any peptide. Full disclaimer

Peptide Schedule Research TeamReviewed Apr 7, 202610 Citations

Apelin-12 peptide icon, one bubble per amino acidApelin-1212 residuesRPRLSHKGPMPFEach bubble = one amino acid. Size = residue mass. Color = chemical class.

Apelin-12 Dosage Calculator

Healing & Recovery · Research · Grade C · 5 min half-life · Injection

Calculate your dose

Adjust vial, water and dose. The answer updates live.

mL
Dose
Syringe

All three take the same units for the same dose. A smaller barrel just spreads it over more space.

↓ 5.0020406080100
Draw to 5.0 units= 0.050 mL

on a U-100 syringe for a 50 mcg = 0.05 mg dose

Check that your syringe says U-100.

Concentration
1,000
mcg/mL
Doses / vial
40
Your mixing recipe

Add 2 mL BAC water to your 2 mg vial. Draw to 5.0 units on a U-100 syringe for a 50 mcg dose. This vial will last 40 doses.

A reminder for 50 mcg (5 units) every day, with a free account.

Dose math and a schedule you can keep.

Syringe units in one tap. A free account adds dose reminders and calendar sync, plus alerts on the peptides you save.

Track every dose with reminders and a calendar.

  • Dose remindersPush or calendar alarm
  • Peptide alertsFor peptides you save
  • Calendar syncApple, Google, Outlook
  • Supply countsDoses left per vial

Your plans, logs and saved peptides sync to every device.

Opens a preview of your schedule first.

Your logs and saved lists are never sold, and not shared except where you choose.

What you need to mix this6 items, matched to your vial, BAC water and syringe
  • Apelin-12, 2 mg vialThe vial size set in the calculator.
  • Bacteriostatic water, 2 mLPrescription-only in the US, so it is dispensed by a pharmacy on a clinician's prescription.
  • 1 mL U-100 insulin syringe (100 units)Matches the syringe set in the calculator. Use a new sterile one for every injection.
  • Alcohol swabsFor each vial stopper every time a needle goes in, and for the injection site. Let the alcohol dry first.
  • A sharps containerUsed syringes go in right after each injection, never loose in the trash.
  • Storage after mixingRefrigerate at 2-8°C, use within 7 days due to short peptide stability.

How to choose each item: the peptide supplies guide.

Open Apelin-12 details
Side effects, protocols by goal, storage, and the sources behind these dosing numbers.

About Apelin-12

Turns your vial size, BAC water, and dose into exact syringe units. Free to use.

Apelin-12 produced the strongest blood pressure reduction of any apelin isoform in rat studies, dropping MAP by 26 mmHg at a single IV dose. Plasma half-life sits around five minutes. Zero human clinical trials exist for native apelin-12. Strictly a preclinical research compound.

CardiovascularVasodilatoryAnti-FibroticCardioprotectiveAPJ AgonistPreclinical
Subcutaneous or Intravenous. Typical beginner frequency: daily.At beginner dose (50 mcg) with a 2mg/2mL vial: draw to the 5-unit mark on a U-100 syringe.
After reconstituting, store at 2-8°C (36-46°F) short-term; -20°C (-4°F) long-term. Refrigerate at 2-8°C, use within 7 days due to short peptide stability.

View side effects and safety warnings →

Quick-Start: Reconstitution

  1. 1Gather supplies: lyophilized apelin-12 vial, bacteriostatic water, alcohol swabs, 29-gauge or 30-gauge insulin syringe (100-unit), blood pressure cuff.
  2. 2Take seated blood pressure. Record the reading. If systolic is below 100 or diastolic below 65, skip the dose.
  3. 3Clean the vial stopper with an alcohol swab. Draw 2 mL bacteriostatic water for a 2 mg vial (yields 1000 mcg/mL). Inject the water slowly along the vial wall. Don't shake. Gentle swirling only.
Full injection guide →
Need a different vial size? Open the universal Apelin-12 reconstitution calculator to enter any vial mg + BAC water mL.

Apelin-12 Dosing Protocol

SpeculativeVery limited human data: dose based on preclinical research
LevelDose / InjectionFrequency
Beginner50 mcgDaily
Moderate150 mcgDaily
Aggressive300 mcgDaily
Note:

Reconstitution math for a 2 mg vial: add 2 mL bacteriostatic water to get 1 mg/mL (1000 mcg/mL). At that concentration, the beginner dose of 50 mcg is 5 units on a 100-unit insulin syringe. Moderate (150 mcg) is 15 units. Aggressive (300 mcg) is 30 units.

With a 5 mg vial and 2 mL bacteriostatic water, you get 2.5 mg/mL (2500 mcg/mL). Beginner dose becomes 2 units. Moderate is 6 units. Aggressive is 12 units.

Reconstituted apelin-12 lasts about 7 days at 2 to 8 degrees Celsius. Don't prep more than a week's supply at a time. Lyophilized powder stores well at minus 20 degrees with desiccant.

The five-minute half-life is the elephant in the room. Every impressive rat data point used IV bolus dosing. SC absorption kinetics for apelin-12 have never been measured in any species. If you see no BP response after two weeks at moderate dosing, inadequate SC bioavailability is the most likely explanation.

You need a blood pressure cuff before you need a syringe. Baseline BP is not optional.

Dosing based on Very limited human data: dose based on preclinical research: 10 published references.View all sources →

How the Apelin-12 Math Works

2mg in 2mL
=1mg/mL
1mg/mL
=10 mcg per unit
50 mcg / 10
=5 units
2mg / 50 mcg
=40 doses

Based on a 2mg vial, 2mL of bacteriostatic water, the beginner dose (50 mcg), and a U-100 syringe. Change any input in the calculator and every line moves with it.

Ask AI about this math

Cross-check your Apelin-12 reconstitution math with AI

Apelin-12 Cost

Compounded
Not available from compounding pharmacies: no established human clinical use pathway; absent from all grey-market peptide catalogs

Pricing updated 2026-04-09

Prices are estimates and vary by source, location, and prescription status.Full pricing breakdown →

Apelin-12 Pharmacokinetics

Pharmacokinetics: Active Dose Over Time

t½ = ~5 minutes (native peptide, rapid ACE2/neprilysin degradation in plasma)
50%25%12.5%100%75%50%25%0%05m10m15m20m25mTime after injectionDose remaining
After 1 half-life (5m): 50% remainsAfter 2 half-lives (10m): 25% remainsAfter 3 half-lives (15m): 12.5% remains
At a 150 mcg dose: 50% = 75 mcg remaining after 5m. Moderate-tier frequency in our sources: Daily.

Disclaimer: This curve is a simplified first-order exponential decay model. Actual pharmacokinetics vary based on injection site, individual metabolism, body composition, and other factors. Half-life values are approximate and based on available preclinical and clinical literature. Many research peptides lack formal human pharmacokinetic studies. This is for educational purposes only, not medical advice.

Read the full Apelin-12 guide →

Related Tools

Frequently Asked Questions

It depends on your vial size, BAC water, and dose. For a 2mg vial with 2mL BAC water, a beginner dose of 50mcg is typically 5 units on a U-100 syringe. Use the calculator above for your exact numbers.

The standard amount is 2mL of bacteriostatic water for a 2mg vial. More water gives a more dilute solution, so the same dose fills more of the syringe and is easier to measure. Less water makes the draw smaller and harder to read. The number of doses per vial does not change either way, since that depends only on vial size and dose. Adjust the BAC water slider in the calculator to see how it changes your syringe units.

At a beginner dose of 50mcg daily, a 2mg vial lasts about 40 doses. The calculator shows exact doses per vial for your selected tier.

Most people use a 1mL U-100 insulin syringe (100 units). For very small doses, a 0.5mL or 0.3mL barrel is easier to read. All three are U-100 graduated, so the number of units to draw is the same on each. Veterinary U-40 syringes are a different scale and the calculator adjusts for that separately.

Store reconstituted Apelin-12 at 2-8°C (36-46°F) short-term; -20°C (-4°F) long-term. Refrigerate at 2-8°C, use within 7 days due to short peptide stability. Unopened vials: Stable at room temperature for up to 2 weeks; store at -20°C for long-term preservation.